3500K bright white the setting for most fluorescent fixtures.
6000k vs 6500k led color. The 6500K is a description of the color temperature which compares the color of the light to an incandescent bulb whose filament is operating at 6500K. I usually rock 6000k HIDS and I was looking at the Morimoto HID kit but I only see that they have the 6500k or a 5500k. A kitchen needs warm colored bulb ranging from 3000K to 4000 K.
6500k is a neutral white bulb in most cases which produce neutral color rendering tones in a tank. A 6500K LED light color temperature as mentioned in the beginning to be found in several LED products will have different demands of end-users to cater to when presented in combination with. It is a red heavy fixture with a mix of blues from blue diodes and from white LEDs which contribute quite a lot of blue spectrum by themselves.
They are a little less efficient than the eb gen 3 or lm301b but if you run them soft you can make up the difference. The lower the color temperature the warmer the light will appear or the redder it will appear. Lamps rated between 5000K and 6000K are viewed as white while lamps above 6000K tend to have a blue cast.
This would be a relatively blue tinted light more comparable to natural daylight which includes direct. 5000K is less than 6000K so 5000K is natural white which makes this color be close to light yellow while 6000K is a higher temperature which makes look somewhat. What is brighter 5000k or 6000k.
Depending on the manufacturers tolerances you should see only a slight difference between 6000k and 6500K. Finally just because an LED bulb emits a color that looks like natural daylight does not mean that it. And study areas need 5000K to 6000K LED bulbs for a bright daylight color.
Step 1 requests that the monitors color temperature be set to 6500K. During mid-day hours direct sunlight will have a color temperature over 5000K and daylight including the entire blue sky will have a color temperature closer to 6500K. The 6000k is usually the most popular.

