The light flashes 3 times to indicate that the feature is enabled.
Floor lamp assembly instructions. Attach the wheels assembly D to tube C and lock tighten them by the screw knob E. If the lamp delivers a much higher wattage than what the light source is made for the light source can burn out. This lamp has a polarized plug one blade is wider than the other as a feature to reduce the risk of electric shock.
Place SHADE Not included over the assembled harp making sure the. Unpack all lamp parts and lay out with the base A lying flat on a steady surface. Remove bolt E flat washer D and wrench F from plastic bag.
Add a rubber washer locknu5t to top of threaded rod. You have to put the wide flat washer on first flush against the base followed by the serrated washer and finally the nut. The washer has a broad circumference to clamp across a wide surface area while the narrower serrated washer prevents the nut coming loose thus preventing the lamp from rotate on its.
Tripod Wood Floor Lamp Assembly Instructions. Avoid pulling wire connections when removing contents from the packaging or during installation. This is enabled by default.
Attach the large end of one Wood Tube I onto the bottom end of the one Metal Tube H by rotating the two parts in a clockwise direction by hand until tight. AFL229 Charlotte Floor Lamp assembly instructions. Thread finial A back onto the harp to.
To ease assembly straighten gooseneck G so that shade H neck and dowel F are in a straight line. Unpack all parts and remove packing materials. Raise Harp Caps D and then Insert the Harp C into the Saddle F and lower the Harp Caps D until they cover the two-pronged Saddle F.

