How To Change Light Bulbs In Outdoor Fixtures

Whats more you wont have to worry about this bulb.

How to change light bulbs in outdoor fixtures. These lightbulbs give off 12W 100W equivalent since theyre LED and 1000 lumens. The bulb will activate when it gets dark and shut itself off when its light. That finial at the very bottom of the fixture holds the base and the class up in the fixture.

There are probably screws at the corners and you can unscrew and lift the top off. Turn at least one of the screws on the collar counter-clockwise to loosen it. Once the lantern became loose the nut holding the glass roof to the lantern had to be undone and then access to the bulbs was accomplished by turning the roof a 18 turn.

If the bulb cover is damaged replace the bulb cover. Note that the Dusk to Dawn bulb is not a motion sensor so once its on it stays on until the sun rises. If you have one bulb burned out its a good idea to replace all the bulbs in the fixture at the same time.

Simply install the bulb and leave the wall switch set to the on position. Locate one or more flat-headed screws on the metal collar the round part into which the globe is inserted. Philips Hue ships the Inara outdoor wall lantern with a single white A19 LED bulb.

This thing is ridiculously simple to use just remove the existing bulb from any standard light fixture and screw this one in. This video shows how to replace a light bulb in an outdoor lighting sconce fixture. Test out the light by moving close to it and activating the motion sensor.

You can purchase a similar bulb as a replacement or any bulb that uses an E26 fitting. This video was created because sometimes the simplest of jobs can be ha. You will need to get on a ladder and look at the top of the fixture.