How To Secure Christmas Lights To House

Match your wires to the woodwork of your window.

How to secure christmas lights to house. Stapling to your eaves the wood part around the perimeter of your roof is probably okay. That will give you the desired 3-inch spacing. Secure the lights to the hooks with transparent tape or plastic cable ties.

I laid them on either side of the back of the columns and then wrapped a string around the top of the pillar to basically tie the hangers to the back of the pillar. You can also look plastic cable ties around the bulb and the hook to keep the lights in place. Hang and secure the lights to the hooks.

Before installing your Christmas lights plug them in to make sure all of your bulbs are working. What to use. But Brick Clips which cling to 1 individual brick and have clips to hold Christmas light strands are the best method on how to hang Christmas lights on brick walls.

How to Hang Christmas Lights Without a Ladder. You can use Gorilla Glue or a hot glue gun to stick to brick temporarily. Stick a small adhesive decorating clip to the walls in each place you want to attach a strand of lights.

I bent the hangers into loops every few inches to act as hooks. Dont install your lights on trees that come in contact with power lines. Use the bottom part of the S as a hook to string the wire of lights on.

It might be tempting to just pull and see what happens but dont. Brick clips go on quickly and easily but can also be moved quickly and easily. Christmas Lights and Extension Cord Secured With Zip Tie This outdoor extension cord is held in place with a zip tie to keep it form pulling the Christmas lights off of the house.