Light Fixture Not Working But Has Power

The correction can be very simplesuch as replacing the light bulb or adjusting the light bulb socketor as complex as replacing the entire light fixture or a wall switch.

Light fixture not working but has power. The third thing to check is to make sure you dont have any circuit breakers tripped or any nearby GFCI outlets tripped. Wire 1 - 142 power from the panel Wire 2 - 142 goes to the light switch Wire 3 - 143 going to another light in this room The light has neutrals from Wire 1 and Wire 3. If it doesnt work but you have power the neutral may be the problem as suggested above.

If the light has fired up as it should the problem will be in the wiring proceed to the next step. AdblockSorry to hear that your fixture is still not working. If you do not have electricity there then you will need to make continuity checks on the hot.

The lighting fixture is a 18 fiberglass sphere with a hole in the bottom. If so that tells you that the switch is still the issue. I have tried several bulbs a new light socket and a separate lamp connected to the two power lines black and white.

Establish that the light is not defective by connecting it directly to a 12VDC power source. Only one wire is permitted under a screw terminal for connection. A tapped up connection is often a bad sign they tapped it up to hide a bad connection like a loose wire nut or a connection with bare wire showing under it.

I does not light. The first step though is to diagnose the problem. If you are uncomfortable with working with the power on get a qualified electrician to do this for youIf you have electricity at the wires then the fixture is faulty.

I want to send power to another rooms light switch to control that rooms lights independently. I have a kitchen light fixture that stopped working the light bulbs worked in another fixture so I figured I needed a new fixture. Simple to more difficult Step 1.